Electrical Components
The main components in HVAC equipment are fan motors, compressors and devices like expansion valves and solenoid valves. Therefore, All of these are electrical loads. A load is a component in a circuit that converts electricity into light, heat, or mechanical motion. The HVAC control systems also contain switches and other control devices. Some switching devices have load electrical components such as the coils in a contactor or relay.
The switchgear/electrical components controls circuits. Which are assembled so that the circuit operates safely under normal conditions. Isolated automatically under fault conditions. Or isolated manually for safe maintenance. Hence, these requirements are met by good workmanship and the installation of proper materials such as:
- Circuit breakers
- Fuses
- Disconnect switches or isolators
- Capacitors
- Relays
- Contactors
- Starters
- Heaters
- Transformers
- Miscellaneous
- Voltage Phase Imbalance
Showing all 8 results
-
Cartridge Heaters (3)
-
Contactors (2)
-
Resistors (3)
- Electrical Components
CTR0343E Contactor Tripol 115AMP
Trane CTR0343E Contactor Tripol 115AMP 110 V AC 50/60 Hz
Most induction motors are started directly on line, but when very large motors are started that way, they cause a disturbance of voltage on the supply lines due to large starting current surges. To limit the starting current surge, large induction motors are started at reduced voltage and then have full supply voltage reconnected when they run up to near rotated speed.
(0 reviews) - Sale!Electrical Components
CTR0344E Contactor Tripol 150AMP
Trane CTR0344E Contactor Tripol 150AMP. Star / Delta Contactor.
Most induction motors are started directly on line, but when very large motors are started that way, they cause a disturbance of voltage on the supply lines due to large starting current surges. To limit the starting current surge, large induction motors are started at reduced voltage and then have full supply voltage reconnected when they run up to near rotated speed.
(0 reviews) - Electrical Components
RES0068E Resistor 1.3 Ohms
Trane RES0068E Transition Resistor 1.3 Ohms
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors (RES0068E Resistor 1.3 Ohms) exists to reduce current flow. Additionally, to adjust signal levels, to divide voltages, bias active elements. The terminating transmission lines, among other uses are also other functions.
(0 reviews) - Electrical Components
RES0069E Resistor 1.9 Ohms
Trane RES0069E Transition Resistor 1.9 Ohms
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors (RES0069E Resistor 1.9 Ohms) exists to reduce current flow. Additionally, to adjust signal levels, to divide voltages, bias active elements. The terminating transmission lines, among other uses are also other functions.
(0 reviews) - Electrical Components
RES0076E Resistor 1.6 Ohms
Trane RES0076E Transition Resistor 1.6 Ohms
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors exists to reduce current flow.
(0 reviews) - Electrical Components
HTR0276E Heater Cartridge
Trane HTR0276E Heater Cartridge 110V 125W
Heat plays an essential role in the chilling process. Accurate, reliable, and quick heating is relied on to provide efficient chiller performance. This has made electric heaters an ideal solution for chilling applications.
(0 reviews) - Electrical Components
HTR0199E Heater Monophase
Trane HTR0199E Heater Monophase 10.5 Bar 400W, Evaporator Heater
Heat plays an essential role in the chilling process. Accurate, reliable, and quick heating is relied on to provide efficient chiller performance. This has made electric heaters an ideal solution for chilling applications.
(0 reviews) - Electrical Components
HTR0101E Compressor Heater
Trane HTR0101E Heater Element Compressor External
A cartridge heater is a tube-shaped, industrial heating element that can be inserted into drilled holes. Also, cartridge heaters provide localized and precise heating and are commonly used in the heating process industry. Typically, cartridge heaters are used to heat a metal block from the inside. And also can be custom manufactured to a specific watt density based on the requirements of the application.
(0 reviews)
